<div>Hi sailors, </div>
<div> </div>
<div>It's been a while since we had a working bee and as the time goes by our shed is not getting cleaner and our fleet is not getting newer. so we need to put some efforts to make our club house a better place and our boats to last a bit longer and more fun to sail. </div>
<div> </div>
<div>I reckon we'll start from 11 am and since I'm going to be there till at least 6 pm, if you cannot make it before midday you can come later. BBQ will be organised for the bees. As we need to do some work on the most sails I'd prefer it to be a no sail day. Windsurfs will be available to take out, but taking into account algae report, I would not recomend people to fall into water too often. </div>
<div> </div>
<div>Things to do:</div>
<div> </div>
<div>Shed maintenance:</div>
<div> </div>
<div>1. Cleaning change rooms and the kitchen. </div>
<div>2. Sweeping the shed. </div>
<div>3. Sorting out, labeling and organising a proper storage for life jackets. </div>
<div>4. I won't mind to have more hungers in the male change room. I think we have wooden planks for them we just need to get a set of hooks. Could someone (preferably a club house officer take a look at it).</div>
<div>5. There are also two non urgent jobs: I'm wondering if someone can take care about the replacement of a broken glass in a window which faces the road and check the roof above the kitchen on leakage. </div>
<div> </div>
<div>Boat maintenance</div>
<div> </div>
<div>1. Logo typing and repairing sails. Putting ribbons and numbers on some of them.</div>
<div>2. Gelcoating some spots ("8" and "Red Arrow")</div>
<div>3. If you have any notes on the laser boats you used, please, send them to me. I don't know if something has to be fixed unless you tell me. </div>
<div> </div>
<div>4. Padding the gasket of the racing tasar. </div>
<div>5. Making some adjustments on Laser II.</div>
<div>6. It would be good if someone could lubricate the hubs of our tri-tier. Its axil was heating up on our last trip. </div>
<div>7. Cutting replacement lines for lasers.</div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div><br clear="all"><br>-- <br>Sincerely, <br>Alex Minovich.<br>Postdoctoral Fellow,<br>Nonlinear Physics Centre<br>Research School of Physical Sciences and Engineering<br>Le Couteur Building, Building 60<br>Mills Road, ANU, 0200 Australia<br>
T: 6125 9076<br>F: 6125 8588<br></div>