[LINK] FTTP soon normal

Paul Brooks pbrooks-link at layer10.com.au
Mon Apr 28 12:58:15 AEST 2014


It's single-mode fibre, so is OK for long runs - but the installer might have been
trying to use the tech-speak to justify doing a lazy installation.
NBN's standards allow for  around 40m of flexible fibre inside the premises from
memory as a "standard install"  - or longer if needed to replicate an existing copper
telecommunications connection inside your home or business. If the homeowner wants the
NTU installed somewhere that requires longer fibre run internally they are supposed to
do it after confirming you'll pay for a non-standard connection fee.

See
http://nbnco.com.au/get-an-nbn-connection/home-and-business/connecting-fibre/fibreinstallation.html

Sounds like there is a lot of snow from installers trying to get away with the fewest
minutes on-site as they can get away with, irrespective of NBNCo's standards.



 


On 28/04/2014 11:56 AM, Scott Howard wrote:
> On Sun, Apr 27, 2014 at 6:38 PM, Rachel Polanskis <gr0ve at exemail.com.au>wrote:
>
>> Also, when it comes to the internal fibre link from the wall outside,
>> we were told it is Single Mode Fibre and so is only suitable for short
>> runs.
>>
> You probably mean Multi-mode fiber, which is only good for runs up to about
> 500 metres (but can do more depending on the wavelengths used).
>
> Single-mode fiber is good for runs measured in the 10's of kilometres or
> more.
>
>   Scott
> _______________________________________________
> Link mailing list
> Link at mailman.anu.edu.au
> http://mailman.anu.edu.au/mailman/listinfo/link




More information about the Link mailing list