[ANU Sailing Club] general use boats final work and check this Sunday

[Alexander Minovich]

Hi everyone,

I'm going overseas for around 6 weeks starting from the 10th of September,
so this Sunday will be basically the last time I can work on the boats
before the beginner courses. So if someone can come and give me a hand it
will be very appriciated. I'll be at the shed this Sunday 29th of August,
starting from 12.30.
What we'll need to do:

General use lasers.
1. Distribute refreshed duggerboards between the boats.
2. Cut a few rubber washers for laser's bungs.
3. Check general lasers rig and replace ropes if necessary and cut some
spare lines.

General use tasars.
4. Sand off and level old gudgeon holes and put gudgeon back (10-15 min 2
people needed).
4a. Put inspection port lids back and secure them with a thin shock cord.
5. Clean and reseal a baler (1 hour work for 2 people)
6. Check the rig and replace ropes if necessary.
7. Put a missing eyelet on one of tasar's sails.
8. Fix the battens.

Racing lasers.
8. Race II, sand a little bit gelcoated spots (if one wishes).
9. Race I, put a racing outhaul line.
10. Race II, completely change the rig on a racing one.
11. Put and adjast new duggerboard friction pads.

Racing taser (optional work).
12. Take off old daggerboard gasket padding.

-- 
Sincerely,
Alex Minovich.
PhD Student,
Nonlinear Physics Centre
Research School of Physical Sciences and Engineering
Le Couteur Building, Building 60
Mills Road, ANU, 0200  Australia
T:  6125 9076
F:  6125 8588
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.anu.edu.au/pipermail/sailingclub/attachments/20100827/01aa08a3/attachment.html